ACCESSORIES




Product Image Item Name- Price
COLORED WATERLINE 25 X3/8 (BLACK)

COLORED WATERLINE 25 X3/8 (BLACK)

$42.95

Add:

COLORED WATERLINE 25 X3/8 (YELLOW)

COLORED WATERLINE 25 X3/8 (YELLOW)

$42.95

Add:

FLEXIBLE BILGE HOSE 10 X3/4

FLEXIBLE BILGE HOSE 10 X3/4

AUTOMATIC Automatically removes water from engine compartment without the use of a float switch.  Cycles every 20 seconds to check for water.  Compact design allows it to fit in tight spaces.  Easy installation.  Equipped with gasoline resistant strainer base and 72” wire leads. NON-AUTOMATIC Removes water from engine compartment.  Runs continuously when switched...
$24.95

Add:

FLO REUSABLE SPIN-ON OIL FILTER

FLO REUSABLE SPIN-ON OIL FILTER

Reusable filters made from type 304 stainless steel micronic filter clothRare earth magnet is attached to the top of the element for pre-filtering the oilSophisticated bypass system is engineered for greater oil filtration and proper bypass pressuresAnodized aluminum housing looks great and helps dissipate heat
$129.95

Add:

FLOW CONTROL VALVE 1/4 ADJUSTABLE

FLOW CONTROL VALVE 1/4 ADJUSTABLE

This valve has been designed to prevent water flow to the water box at idle and just off idle engine speeds.  It allows the craft to be more responsive off the line and around the turns.  Even completely stock watercraft show an improvement in throttle response. In a race start situation, the craft is under a slight load awaiting the start.  Water fills up the water box and exhaust...
$44.95

Add:

FLOW CONTROL VALVE 3/8 ADJUSTABLE

FLOW CONTROL VALVE 3/8 ADJUSTABLE

This valve has been designed to prevent water flow to the water box at idle and just off idle engine speeds.  It allows the craft to be more responsive off the line and around the turns.  Even completely stock watercraft show an improvement in throttle response. In a race start situation, the craft is under a slight load awaiting the start.  Water fills up the water box and exhaust...
$54.95

Add:

FLOW CONTROL VALVE 3/8 NON-ADJUSTABLE

FLOW CONTROL VALVE 3/8 NON-ADJUSTABLE

This valve has been designed to prevent water flow to the water box at idle and just off idle engine speeds.  It allows the craft to be more responsive off the line and around the turns.  Even completely stock watercraft show an improvement in throttle response. In a race start situation, the craft is under a slight load awaiting the start.  Water fills up the water box and exhaust...
$44.95

Add:

QUICK CONNECT IN-LINE WATER RESTRICTOR 3/8

QUICK CONNECT IN-LINE WATER RESTRICTOR 3/8

Allows fine adjustments to the water flow through the engine for higher performance3/8 inch model comes with all stainless steel hose clamps and three restrictors — sizes 2, 3, 4The 1/4 inch model is drilled and tapped to accept a Mikuni main jet allowing quick and precise control of total volume of water increments.
$32.95

Add:

SUPERCHARGER HUB KIT KAW ULTRA 250/ 260

SUPERCHARGER HUB KIT KAW ULTRA 250/ 260

$83.95

Add:

VARIABLE WATER CONTROL 3/8 ADJUSTABLE

VARIABLE WATER CONTROL 3/8 ADJUSTABLE

Allows user to adjust flow on any 3/8" ID waterline.  A great product for fine tuning engine/exhaust temperature for maximum power
$24.95

Add:

WSM 010-119 BEARING

WSM 010-119 BEARING

COMPLETE Top end kits include pistons, rings, wrist pins, circlips, needle bearings, head, base, intake and exhaust gaskets PISTON KITS include Piston, rings, pin and circlips Platinum Series are made of high strength hardened aluminum designed to prevent skirt and ring groove breakageThe piston walls are treated with a nonabrasive coating which reduces heat and friction for added horsepower and...
$13.95

Add:

WSM BEARING CRANK YAM 1200 MAG

WSM BEARING CRANK YAM 1200 MAG

$74.95

Add:

WSM BEARING CRANK YAM 1200R/1300R MAG SIDE

WSM BEARING CRANK YAM 1200R/1300R MAG SIDE

$133.95

Add:

WSM BEARING CRANKSHAFT

WSM BEARING CRANKSHAFT

$85.95

Add:

WSM BEARING CRANKSHAFT

WSM BEARING CRANKSHAFT

$52.95

Add: